Installing The Handlebar - Fuxtec FX-AF1196 Original Bedienungsanleitung

Original-Bedienungsanleitung FUXTEC FX-AF1196_de_en_fr_ita_rev02
6.5 Installing the depth regulator
• Attach the depth regulator to the top of the depth regulator holder.
The handle should point to the rear.
• Insert the dowel pin through the depth regulator bracket and the
depth regulator hole fixed with a B pin - the chopper blades should
not touch the ground.

6.6 Installing the handlebar

• Insert the handlebar arm outside the transmission cover and align the
lower holes.
• Insert the bolts and nuts for each side into the lower holes.
• Insert the bolt and nut for each side into the upper holes at the
desired handlebar height.
52