Input Sources - Reflexion LEDW22C Bedienungsanleitung

Scan Mode
Unicable
Search
First installation of DVB-C
TV-Connection
Tune Type
Scan Mode
Frequency (KHz)
Network ID
Symbol (ks/s)
Once you have made all the settings, press the OK button to start the search.
7. While the search is running, the number of programs found is displayed.

TV

RADIO

Data
8. Once the search is complete, you have finished the initial installation.
9. TV playback starts with the first TV channel.

INPUT SOURCES

1. Press the INPUT button to display the signal sources.
Use the ▲ ▼ buttons to select the various signal sources.
2.
3. Press the OK button to confirm the selection.
4. The following connections are available:
Auto / Blind Scan / Preset
Unicable-Setting: Off / On
Userband / SRC Addr.: Select the user band that matches
the multiswitch, LNB.
Frequency: Enter the frequency suitable for the multiswitch,
LNB.
Position: A / B
Starts the search.
First Time Installation
Cable
DTV+ATV, TV, ATV
Full / Network Scan
Only available if the search mode is set to network scan.

Auto

Manually
Only available if the search mode is set to network scan.

Auto

Manually

Auto

Manually
47
EN