PCWork PCW02B Bedienungsanleitung Seite 18

WARNING:
•
The voltage in the measured circuit cannot exceed 250V and the current
cannot exceed 600mA; otherwise the device might get damaged.
•
If the display shows "OL", disconnect the probes' tips from the measuring
circuit immediately (current exceeds measurement range).
•
Always test known current before using the device, to ensure that device
functions properly
•
When measuring is finished, always remove the probes from the measuring
object and the device.
Caution:
To avoid damaging the instrument or equipment, check the fuses before
measuring and ensure that the measured current does not exceed the rated
maximum current. If the fuses are released during measurement, stop the
operation immediately. Always use the correct input sockets.
18