Herunterladen Inhalt Inhalt Diese Seite drucken

After-Sales Service - V-ZUG Komfort 60i Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Komfort 60i:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3

AFTER-SALES SERVICE

Before contacting the After Sales Service:
1. See if you can solve the problem yourself with
the help of the Troubleshooting guide.
2. Switch the appliance off and then on again to see
if the problem has been solved. If it has not,
switch off the appliance again and repeat the
operation after one hour.
3. If the problem persists after this course of
action, contact After-sales Service.
Specify:
• the nature of the fault,
• the appliance model,
• the Service number (the number after the word
SERVICE on the data plate at the side of the
crisper drawer),
INSTALLATION
• Install the appliance away from heat sources
(minimum distance: 30 cm from coal and
paraffin stoves, 3 cm from ovens and electric
cookers).
• Install the appliance in a dry, well-ventilated
place.
• Do not obstruct the appliance's air vents.
• Clean the inside (see relevant chapters).
• Fit the accessories supplied.
Electrical connection
• Electrical connections must be made in
accordance with local regulations.
• Voltage and power consumption are indicated
on the rating plate at the side of the crisper
drawer.
All manuals and user guides at all-guides.com
• Your full address,
• Your telephone number and area code.
Note:
The direction of door opening can be
changed. If this operation is performed by
After-sales Service it is not covered by the
warranty.
• Regulations require that the appliance be
• If the plug and socket are not of the same type,
• Do not use extension leads or adapters
Disconnecting the appliance
• It must be possible to disconnect the appliance
16
earthed. The manufacturer declines all
liability for injury to persons or animals and
for damage to property resulting from
failure to observe the above procedures
and reminders.
have the socket replaced by a qualified
electrician.
by unplugging it or by means of a two-pole
switch fitted upline of the socket.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis