Activities During Operation; Clipping; Changing The Battery - Heiniger Saphir Originalbetriebsanleitung

Fig. 16
Fig. 17
NOTE!
For proper operation make sure that the clipperhead (1) is engaged correctly.
6.2

Activities during operation

6.2.1 Clipping

1. Fix and calm the animal sufficiently before clipping.
2. Switch on the clipper already in the field of vision of the animal.
3. Approach to the animal from ahead.
4. During clipping, look at the behaviour of the animal.

6.2.2 Changing the battery

When the battery is unloaded, the clipper is turned off by a protective circuit.
Fig. 18
Fig. 19
14
Translation of the original instructions / Small animal clipper
3. Fold the clipperhead (2) by light
pressure on to the clipper (1)
which is switched on.
4. Make sure, that
perhead (1) is engaged firmly.
1. Move the switch to position "0"
(fig. 4).
2. Push the battery interlock (2) on
both sides inward and pull the
battery (1) out of the clipper.
3. Insert charged battery (1) into
the shearer (2), until the battery
lock is locked in on both sides.
the clip-