Power Cable Connection - Pioneer GEX-P5700TVP Installationsanleitung

Power cable connection

This unit
Connection method
1. Clamp the lead.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of
the parking brake. This lead must be
connected to the power supply side of
the parking brake switch.
Fuse holder
Fuse resistor
Power supply side
Ground side
Yellow
To terminal always supplied with power
regardless of ignition switch position.
Red
(Connect this lead only when this unit is
used as STAND ALONE mode.)
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Black (ground)
To vehicle (metal) body
2. Clamp firmly with
needle-nosed pliers.
Parking brake switch
2