Installation
Before Installing and Fixing
• Make temporary connections first to check that the unit and system are working properly.
Before affixing the adhesive tape
• Make sure the surface is free of moisture, dust, grime, oil, etc. before affixing the tape.
Installing the Hide-away unit
Installation Precautions
• Never install in locations such as the following because of the danger of malfunction due to high
temperatures.
* Locations such as a dashboard or rear tray where there is exposure to direct sunlight.
* Near heater outlets.
• Near doors, etc., where there is danger of exposure to rain.
• When installing under the front seat, make sure there is no hindrance to sliding of the seat.
• Direct installation on the carpet is possible if the hard Velcro tape will adhere to the carpet. Do not
use the soft Velcro tape in this case.
Hide-away Unit Installation
Adhere the hard Velcro tape (provided) to the bottom of the hide-away unit and adhere the
soft Velcro tape (provided) to the installation location.
33
Car mat
Hide-away unit
Velcro tape (hard)
Velcro tape (soft)