Carrier 40VA003D7FAQEE Installations- Und Benutzerhandbuch Seite 6

Safety
• The connection kit should be effectively grounded. Electric shocks may occur if the connection kit is ungrounded or
inappropriately grounded. The wire for earthing shouldn't be connected to the connections on the gas pipe, water
pipe, lightning rod or telephone.
• The breaker for electricity leakage should be mounted. If not, accidents such as electric shocks may happen.
• The installed connection kit should be checked for electricity leakage by being powered.
• After installation, all cassette concealed connection kits should be trial-tested. After the proper operation of the
machine, other fitments can be made.
• When installing the connection kit, please fix the box and connecting pipes in an efficient way to avoid shaking when
changing connection kit.
• If the ambient humidity is over 80%, when the water discharge hole is blocked or the filter becomes dirty, or airflow
speed change, there may be leads to condensing water drop down, and at the same time there may be some drops
of water spit out.
• Keep the connection kit, power supply wiring, conductor, etc. at least 1 m away from the TV and radio to avoid
image interference and noise. However, sometimes there is still noise when the distance is over 1 m due to the
different states of radio waves.
• Try to install connection kit where the fluorescent lamp is far away.
• When wireless devices are being installed, the distance that the signal from the controller will reach may be
shortened in a room with a fluorescent lamp that is turned on in an electric way (frequency conversion or rapid
start).
• Do not use components other than the fuse of proper capacity, such as metal wire and copper wire, which will cause
fires and other faults if used instead of the fuse.
• When doing the cleaning and maintenance, make sure that the operation has been stopped and the manual power
switch is in the off position.
• Do not use appliances such as water heater near the connection kit. Using appliances producing steam near the
connection kit may lead to accidents such
Attention
Prohibitions
4