JVC KV-MRD900 Bedienungsanleitung Seite 36

About sounds reproduced through the terminals
• Through the analog terminals (AV-OUT/cordless headphones): 2-channel signal is emitted.
When playing a multi-channel encoded disc, multi-channel signals are downmixed.
(AUDIO—DOWN MIX: see page 30.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this
terminal. (For more details, see table below.)
To reproduce multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect
an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set
"DIGITAL AUDIO OUTPUT" correctly. (See page 30.)
Output signals through the DIGITAL OUT terminal
Output signals are different depending on the "DIGITAL AUDIO OUTPUT" setting on the setup
menu (see page 30).
Playback Disc
DVD 48 kHz, 16/20/24 bits Linear PCM
96 kHz, Linear PCM
with DTS
with Dolby Digital
with MPEG Audio
Audio CD, Video CD
Audio CD with DTS
MP3/WMA
36
DIGITAL AUDIO OUTPUT Output Signals
STREAM/PCM DOLBY DIGITAL/PCM
48 kHz, 16 bits stereo Linear PCM
DTS bitstream 48 kHz, 16 bits stereo Linear PCM
Dolby Digital bitstream
MPEG bitstream
44.1 kHz, 16 bits stereo Linear PCM
DTS bitstream 44.1 kHz, 16 bits stereo Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
PCM ONLY
48 kHz, 16 bits
stereo Linear PCM
48 kHz, 16 bits Linear PCM