INSTALLATION INSTRUCTIONS
Installation falls under the exclusive responsibility of specialists.
The installer must comply with local laws and applicable standards.
Fitting the seal
The seal supplied with the hob prevents liquids from entering the cabinet. Installation must be
carried out carefully and in accordance with the following drawing.
Mounting – Installing
The cut sizes are:
5RZ34411
•
Ensure that there is a distance of 50 mm between the hob and the wall or sides.
•
This appliance complies with type Y with regard to protection against fire hazards. Only
appliances of this type may be installed on one side of adjacent tall cupboards or walls.
However, no furniture or appliances may be higher than the hob from the other side.
A
290 mm
520 mm
Glue the seal (2) two millimetres from
the outer edge of the glass after
removing the protective film (3).
B
E
270 mm
11
F
490 mm
57 mm
H