Assembling - Woom ORIGINAL 2 Bedienungsanleitung

6�2 Assembling
See Section 11.1 on page 44 for tightening torques.
Mounting the handlebar
Place the handlebar and stem unit on the fork
shaft and make sure that the brake levers are
at the front.
Mounting the saddle
Open the quick-release lever
(or seat post clamp) with a
hex key.
Align the handlebar at a 90° angle to the front
wheel and tighten the stem screws.
Position the seat post at the
appropriate height (see hints
on page 36 for adjusting seat
height).
35
Close the quick-release lever
(or seat post clamp) with a
hex key.