Electrolux EIV9467 Benutzerinformation Seite 33

To modify the default heat setting manually
touch the control bar and choose the
appropriate level.
• You may change the default heat setting
only if the function is active.
• You can change the default heat settings
for each position separately. When you
deactivate the hob, it remembers your
settings and applies them the next time
you activate the function.
To deactivate the function, touch
symbol turns white.
5.13 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on the basis of the mode
setting and temperature of the hottest
cookware on the hob. You can also operate
the fan from the hob manually.
For most of the hoods, the
remote system is originally
deactivated. Activate it before
you use the function. For more
information refer to the hood
user manual.
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 - H6. The hob is
originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes the temperature of the cookware
automatically and adjusts the speed of the
fan.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the hob.
To do so set the automatic mode to H1 - H6.
The light on the hood
deactivates 2 minutes after
deactivating the hob.
Automatic modes
Mode H0
Mode H1
Mode H2
. The
Mode H3
Mode H4
Mode H5
Mode H6
1) The hob detects the boiling process and acti‐
vates the fan speed in accordance with the au‐
tomatic mode.
2) The hob detects the frying process and acti‐
vates the fan speed in accordance with the au‐
tomatic mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
The display comes on and goes off.
3. Touch
4. Touch
5. Touch
automatic mode.
When you finish cooking and deactivate the
hob, the hood fan may still operate for a
certain period of time. After that time the
system deactivates the fan automatically and
prevents you from an accidental activation of
the fan for the next 30 seconds.
Auto‐
Boiling 1)
matic
light
Off Off
On Off
3) On Fan speed
1
On Off
On Fan speed
1
On Fan speed
1
On Fan speed
2
for 3 seconds.
for 3 seconds.
a few times until
of the Timer to select an
To operate the hood directly on
the hood panel deactivate the
automatic mode of the function.
Frying 2)
Off
Off
Fan speed
1
Fan speed
1
Fan speed
1
Fan speed
2
Fan speed
3
comes on.
ENGLISH 33