Changing Rotary Direction; Safety Lock; Changing Bits And Magnetic Bit Holder - Parkside PAS D5 Bedienungs- Und Sicherheitshinweise

˜ Changing rotary direction
Push through the rotation direction switch
direction (Fig . C):
Switch pushed from
(b)
Right
Left (a)
˜ Safety lock
Set the rotation direction switch
protrudes equally on both sides . The switch trigger
pressed in this setting .
˜ Changing bits and magnetic bit holder
Pull out the bit
1 ] [
holder or the magnetic bit holder
NOTE: Screw bits are labelled according to their dimensions
and their shape . If you are unsure, always try the particular
screw bit out to see whether it sits in the screw head without any
free play .
32 GB
Direction
Tighten
screws
Loosen
screws
5 ] [
11 ] [
. Insert another type of bit into the bit
[ 5 ]
to set the rotary
Direction indicator
to the middle position so that it
7 ] [
10 ] [
(Fig . D) .
[ 2 ]
4 ] [
cannot be