Storage; Required Tools - Weh TW711 Betriebsanleitung

AE Operating instructions
5�2

Storage

Î
Follow the safety instructions in Chapter 5.1 and observe the following storage
times. The appropriate storage period applies from the date of delivery (i.e. the date
of invoicing or goods issue date as recorded by WEH or its distributor). If the
WEH Product is installed in a complete system, the storage time depends on the
®
component with the shortest storage time.
Up to 3 years
> 3 years

6. REQUIRED TOOLS

Part no�
--
--
--
W136538
E99-40
* The WEH
O-ring picker is manufactured from plastic and has to be considered as a
®
consumable product.
Page 14
MD-10060-L51-R1.1.0-03
Î
Before use, check the surfaces of the external seals for cracks.
Attention: Any elastomer seals with fine cracks on the surface must
be replaced.
Note: If you should have any doubts about the aging state of the
stored WEH Product, please contact WEH.
®
Attention: Before commissioning, check the WEH
tightness. On this topic, see Chapter 7. Installation on page 15.
- Before use, all elastomer seals must be replaced.
For this, send the WEH
Description
Suitable open-ended spanner
(suitable for the relevant spanner widths)
Calibrated torque wrench
(suitable for corresponding torque)
Suitable open-ended spanner insert
(suitable for the relevant spanner widths and
torque spanner)
O-ring picker set *
WEH
®
WEH Lubricant
®
Product to WEH for maintenance.
®
Installation
X
X
X
Product for leak
®
Maintenance &
Lubrication
X
X