Installation instruction adjust table top Power Drill or Phillips step 4, adjust Long tube length according to desk top size. step 5, Install base. First Second A (10x) B (6x) C (4x) D (8x) E (3pcs) M8x10mm ST5.0x16mm ST5.0x45mm M8x20mm ST3.9x16mm (optional) (optional)
Seite 4
Lösen LOOSEN drei Bohrungen three holes drei Bohrungen three holes the three holes must not be blocked before installation Die drei Bohrungen dürfen vor der Installation nicht blockiert werden Schritt 1, lösen Sie die vier Schrauben wie gezeigt. A A A A A A step 2,Install Long tube.
Seite 5
Installation instruction Tischplatte anpassen Schritt 4, passen Sie die Länge des langen Bohrmaschine oder Kreuzschraubenzieher Rohres entsprechend der Größe der Tischplatte an. Schritt 5, Fußteile installieren. Zweite Zuerst A (10x) B (6x) C (4x) D (8x) E (3pcs) M8x10mm ST5.0x16mm ST5.0x45mm M8x20mm ST3.9x16mm...
Seite 6
Parameter instruction Electric Control Part: Input Voltage:100-240Vac,50/60Hz,3.5A Duty cycle:10%MAX 1 min on 9 min off Fest Switch power supply,low energy consumtion Manual device can move and long press Desk frame part: built-in limit switch Dynamic load:40KG The maximum static load:80KG Fest Load speed:30mm/s Schritt 7, Schraube fest anziehen...