Makita MR006G Betriebsanleitung Seite 14

Playing a previously-paired Bluetooth
source device
If your Bluetooth device already paired with the radio
previously, the unit will memorize your Bluetooth device
and it attempts to reconnect with a device in memory
which is last connected. If the last connected device is
not available, the radio will be discoverable.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3
seconds until "BT PAIR" is shown on the display or turn
off Bluetooth on your Bluetooth device to disable the
connection.
You can also press the Source button to select any
mode other than Bluetooth mode to disable the
connection.
Deleting Bluetooth paired device
memory
To clear the memory of all paired devices, press and
hold the Bluetooth pairing button more than 5 seconds
until "CLEARING" shows on the display.
AUXILIARY INPUT SOCKET
A 3.5mm Auxiliary input socket is provided at the front
of your radio to permit an audio signal to be fed into the
unit from an external audio device such as a MP3 or CD
player.
1. Connect an external audio source (for example, MP3
or CD player) to the AUX IN socket.
2. Press the Power button to switch on your radio.
3. Repeatedly press and release the Source button until
"AUX IN" is displayed.
4. To have the better sound quality, we recommend
setting the volume to more than two-thirds level on
your audio device and then adjust the volume on the
radio as required.
Note:
Audio cord is not included as standard accessories.
MAINTENANCE
CAUTION:
● Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.
● Do not wash the radio with water.
SPECIFICATIONS
Power requirements
AC power adapter
Battery
Frequency coverage
®
Bluetooth
(The Bluetooth
trademarks owned by Bluetooth SIG, Inc.)
Bluetooth version
Bluetooth Profiles
Transmission Power
Transmisson Range
Supported codec
Compatible Bluetooth
profile
Maximum radio-
frequency power
Operating Frequency
Circuit feature
Loudspeaker
Output power
Input terminal
Antenna system
Dimensions (L x W x H) 285 x 172 x 305mm
Weight
14 ENGLISH
DC 12V 2.5A, center pin
positive
UM-3 (AA size) x 2 for back
up
Slide battery: 10.8V - 36V
FM 87.50-108 MHz
(0.05MHz/step)
AM (MW) 522-1,710 kHz
(9kHz/step)
®
word mark and logos are registered
5.0 Certified
A2DP/SCMS-T/AVRCP
Power Class2
Optimum:
Max. 10 meters (33 feet)
Possible:
Max. 30 meters (100 feet)
(varies according to usage
conditions)
SBC
A2DP/AVRCP
BT EDR: 3.887dBm
2402MHz~2480MHz
2.5 inches 8 ohm x 2
4 inches 6 ohm x 1
10.8V-12V max:
2W X 2 + 10W
14.4V: 3W X 2 + 15W
18V: 5W X 2 + 25W
36V: 5W X 2 + 25W
3.5mm dia. (AUX IN)
FM: Built-in antenna
AM: bar antenna
5.5Kg (without battery)