Abus TVIP10001 Bedienungsanleitung Seite 111

SMTP:
POP before SMTP:
POP server name:
User name:
Password:
Recipient e-Mail address:
Administrator e-Mail address: The address of the e-mail account. The maximum length is 64 characters.
Attached file type:
Subject:
Message:
The settings can be tested using the "Test" button. Accept the settings by
pressing "OK" or cancel them by pressing "Cancel".
Alarm sending
Alarm sending:
File attachment:
Image file name:
Suffix:
Delete sequence number:
Alarm:
Effective Period:
Always: The detectors for these alarms are permanently activated.
If authentication is made using a user name and password on the e-mail
server, then this option must be activated.
Select this option if the send/receive e-mail function is required before e-mails
are sent. It may be possible to delete "POP before SMTP" in the e-mail
account settings.
Enter the POP server name of the e-mail sender here (e.g. pop.web.de). This
option is only available when "POP before SMTP" is active. The maximum
length is 64 characters.
User name of the e-mail account.
Password of the e-mail account.
The e-mail address of the recipient. The maximum length is 64 characters.
Select here whether snapshots or video clips should be transferred to the
FTP server.
Enter a subject here (max. 64 characters).
The message cannot be longer than 384 characters. A line break uses 2
characters.
Activates or deactivates the transmission of image data to an e-mail address
over an SMTP server.
Specify whether the e-mail should have an attached file here (image data).
Specify the file name for the image/video file here.
Select the file suffix here. This can be the date and time or a sequence
number.
Resets the sequence number to 1.
In the event of an alarm, certain reactions can be configured for SMTP
transmission here. A button for configuring the corresponding alarm detector is
available for each entry (if configuration of the detector or trigger is possible).
111
English