Power Supply - Silvercrest SUH 3.0 A1 Bedienungsanleitung Und Serviceinformationen

 Make sure that no fire hazards (e.g. burning candles) are placed on or near
the device.
Cables
 Never hold the power cord with wet hands as this may cause a short circuit
or electric shock.
 Never place the device, heavy objects or furniture on the cable and take
care that the cord does not become trapped, especially at the plug and
sockets. Never tie knots in the cable and do not tie it together with other
cables. All cables should be positioned so that nobody can trip over them or
be obstructed by them.
 To disconnect a cable, pull on the plug of the USB hub, not the cable.
 A damaged power cord can cause fire or an electric shock. Inspect the
power cord from time to time. Never use adapter plugs or extension cables
that do not comply with the current safety regulations in your country, and do
not modify any power cords or integrated mains adapters yourself!

Power supply

The device consumes electricity in the Standby mode. In order to completely
disconnect the device from the mains, the integrated mains adapter must be
pulled out from the wall outlet. For this reason, the device should be positioned
in such a way that assures direct and unobstructed access to the wall outlet so
that the integrated mains adapter can be immediately pulled out in an
emergency situation. To avoid the danger of fire if the integrated mains
adapter is not going to be used for a long while (e.g. during holidays) it should
always be disconnected from the power socket. Before stormy weather when
there is the danger of lightning, disconnect the device from the power supply.
Use only the supplied mains adapter TYTE150500300EU to avoid
overheating, deformation of housing, fire, electric shock, explosions and other
dangers. Never connect this power adapter to other devices.
SilverCrest SUH 3.0 A1
English - 37