Set-Up - Peqlab EV200 Serie Bedienungsanleitung

SET-UP

1. Select SET-UP and press SET.
2. Select LANGUAGE and press SET.
3. Select the desired language and press SET.
4. Select CONTRAST and press SET.
5. Adjust the contrast of the display and press SET.
6. Select ALARM and press SET.
7. Decide whether or not the output voltage should
shut down at a too low output current and press SET.
8. Select POWER FAIL and press SET.
9. Decide whether or not the instrument should proceed
with the experiment for the remaining time
after a power failure and press SET.
10. Select STAND-BY and press SET to return.
Select INFO and press SET to see general information about the
electrophoresis power supply.
PEQLAB Biotechnologie GmbH_V1107
All manuals and user guides at all-guides.com
11
---- STAND-BY
SET-UP
---- SET-UP ----
LANGUAGE
CHOOSE LANGUAGE:
ENGLISH
---- SET-UP ----
CONTRAST
---- SET-UP ----
ALARM
CURRENT < 1 mA
ALARM:
---- SET-UP ----
POWER FAIL
POWER FAIL
DETECTION:
---- SET-UP ----
STAND-BY
---- SET-UP ----
INFO
----
YES
YES