Interface Rs232C; Data Transfer Mode - KERN DE Serie Betriebsanleitung

7.5 Interface RS232C

Data output via interface RS 232 C
General Information
The previous condition for the data transfer between balance and a peripheral device
(e.g. printer, PC ...) is that the appliances are set to the same interface parameters
(e.g. baud rate, transfer mode ...).

7.5.1 Data transfer mode

 In weighing mode keep the PRINT key pressed until [Unit]
 Press the MODE button several times until „Pr" is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key
rE CR
Pr PC
AU PC Continuous data output
bA Pr
AU Pr
 Use the SET key to confirm selection. The balance returns to
28
appears.
Data output via remote control commands
Data output using the PRINT key
Output on bar code printer
Autom. data output of stable weighing values
weighing mode.
DE-BA-e-1758