Led Indicators; Connectors And Buttons - Axis Communications Q60 Serie Installationsanleitung

5
Bracket ring
6
Trim ring
7
Safety wire

LED Indicators

Status LED
Unlit
Green
Amber
Amber/Red
Red

Connectors and buttons

For specifications and operating conditions, see page 18.
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
NO NO NO TICE TICE TICE
Use the supplied midspan.
NO NO TICE NO TICE TICE
The product shall be connected using a shielded network cable (STP). All cables connecting
the product to the network shall be intended for their specific use. Make sure that the
network devices are installed in accordance with the manufacturer's instructions. For
information about regulatory requirements, see Electromagnetic compatibility (EMC) on
page 4.
I/O and audio connector
Terminal connector for connecting external equipment:
• Audio equipment
• Input/Output (I/O) devices
When connecting external equipment, an Axis multicable is required in order to maintain the
product's IP rating. To find out more, go to Multicable connectors on page 16.
Indication
Connection and normal operation.
Steady green for 10 seconds for normal operation after startup
completed.
Steady during startup. Flashes during firmware upgrade or reset
to factory default.
Flashes amber/red if network connection is unavailable or lost.
Firmware upgrade failure.
15
AXIS Q60 Series
EN