Cleaning The Brewing Unit (Figure G) - Siemens TE603 Serie Gebrauchsanleitung

en
The milk system 4b will now clean itself
automatically.
● Then empty the glass and clean the
suction pipe 4d.
Cleaning by hand:
Risk of burns!
B
The milk system 4b becomes
extremely hot. After use, always let
them cool down before you touch
them.
Take the milk system 4b apart to clean it:
● Push the beverage outlet 4 right down.
● Take off the cover 4a towards the front
and pull off the milk tube.
● Remove the milk system 4b by pulling it
straight forward.
● Take apart the upper and lower parts of
the milk system 4b.
42
All manuals and user guides at all-guides.com
● Separate the milk tube from the suction
● Clean the individual parts with washing-
● Rinse all parts with clean water and dry
F
● Reassemble the individual parts.
● Place the milk system 4b back in the
● Replace the cover 4a.
Cleaning the brewing unit
(Figure G)
F
In addition to the automatic cleaning
programme, the brewing unit 14 should be
removed regularly for cleaning.
● Use the main switch J 1 to switch the
● Open the door 13 to the brewing unit.
● Slide the red latch 14a on the brewing
● Press the eject lever 15 right down. The
● Take hold of the brewing unit 14 by the
pipe.
up liquid and a soft cloth.
them.
The upper and lower parts of the milk
system 4b, the milk tube 4c and the
suction pipe 4d can also be cleaned
in a dishwasher.
appliance from the front, making sure it is
straight.
See also the Quick reference guide in
the storage compartment 16.
appliance completely off.
unit 14 all the way to the left.
brewing unit will be released.
recessed grips and carefully remove it.