Belden HIRSCHMANN EAGLE40-03 Referenzhandbuch Seite 190

#
Bedeutung
11 Measured value, scaled value M_ME_NB_1
12 Measured value, scaled value with time tag M_ME_TB_1
13 Measured value, short floating point value M_ME_NC_1
14 Measured value, short floating point value with time tag M_ME_TC_1
15 Integrated totals M_IT_NA_1
16 Integrated totals with time tag M_IT_TA_1
17 Event of protection equipment with time tag M_EP_TA_1
18 Packed start events of protection equipment with time tag M_EP_TB_1
19 Packed output circuit information of protection equipment with time tag
M_EP_TC_1
20 Packed single-point information with status change detection M_PS_NA_1
21 Measured value, normalized value without quality descriptor M_ME_ND_1
30 Single point information with time tag CP56Time2a M_SP_TB_1
31 Double point information with time tag CP56Time2a M_DP_TB_1
32 Step position information with time tag CP56Time2a M_ST_TB_1
33 Bit string of 32 bit with time tag CP56Time2a M_BO_TB_1
34 Measured value, normalized value with time tag CP56Time2a M_ME_TD_1
35 Measured value, scaled value with time tag CP56Time2a M_ME_TE_1
36 Measured value, short floating point value with time tag CP56Time2a
M_ME_TF_1
37 Integrated totals with time tag CP56Time2a M_IT_TB_1
38 Event of protection equipment with time tag CP56Time2a M_EP_TD_1
39 Packed start events of protection equipment with time tag CP56time2a
M_EP_TE_1
40 Packed output circuit information of protection equipment with time tag
CP56Time2a M_EP_TF_1
45 Single command C_SC_NA_1
46 Double command C_DC_NA_1
47 Regulating step command C_RC_NA_1
48 Setpoint command, normalized value C_SE_NA_1
49 Setpoint command, scaled value C_SE_NB_1
50 Setpoint command, short floating point value C_SE_NC_1e
51 Bit string 32 bit C_BO_NA_1
58 Single command with time tag CP56Time2a C_SC_TA_1
59 Double command with time tag CP56Time2a C_DC_TA_1
60 Regulating step command with time tag CP56Time2a C_RC_TA_1
61 Setpoint command, normalized value with time tag CP56Time2a C_SE_TA_1
62 Setpoint command, scaled value with time tag CP56Time2a C_SE_TB_1
63 Setpoint command, short floating point value with time tag CP56Time2a
C_SE_TC_1
64 Bit string 32 bit with time tag CP56Time2a C_BO_TA_1
70 End of initialization M_EI_NA_1
100 (General-) Interrogation command C_IC_NA_1
101 Counter interrogation command C_CI_NA_1
102 Read command C_RD_NA_1
103 Clock synchronization command C_CS_NA_1
104 ( IEC 101 ) Test command C_TS_NB_1
RM GUI EAGLE40-03
Release 4.1.01 05/2021
Netzsicherheit
[ Netzsicherheit > DPI > IEC104 Enforcer ]
189