MY RECIPES FUNCTION (DIY)
"My recipe" function has been developed to remember your favourite
cooking choices.
• Press "My recipes" key 2 times to enter into DIY menu. The indicator
lights red. It is possible to change the DIY program from 1 to 4
by pressing "<" or ">" key.
• The screen displays the default cooking time and the default cooking
temperature. Both can be adjustable for DIY.
• If you want to adjust the default parameters, press on the "Time/
Temperature" key.
• The fist press allow to change the cooking temperature which is
flickering, the temperature indicator is lighting. Press "<" or ">" key to
adjust the cooking temperature. Then press "OK" or "Time/Temperature"
key to validate.
• Then you can change your cooking time which is flickering, the time
indicator is lighting. Adjust your cooking time by pressing "<" or ">" key.
Press "OK" or "Time/Temperature" key to start the cooking.
• The lights of "Start" and "OK" light up, the appliance sounds a beep and
the screen displays the remaining time. The indicator of the selected
DIY is lighting.
• At the end of cooking, the buzzer will beep three times, the multicooker
will enter keep warm status, the "Keep Warm" indicator appears on the
display and the screen display the keep warm time. The lights of "OK"
and "Start" are lighting during keep warm.
If the temperature is under 70°C, the keep warm is not available
If the temperature is up to 70°C, the keep warm is allowed.
• To stop the keep warm, press "Start/Stop" key. You can also cancel the
keep warm by a long press on "OK/Cancel" key.
• The Delayed Start is available only if the setting temperature is higher
than 90°C.
EN
45