Haier AS20S2SF1FA-MW3 Bedienungsanleitung Seite 3

WARNING:
· ·
Read the maintenance instructions before opening the appliance.
Eye or skin irritation may result from exposure from top air inlet and inner part. During air filter
taking and putting for maintenance, please make sure that the power is cut off before approaching
· · ·
the product.
UV-C barriers bearing the ultraviolet radiation hazard symbol should not be removed.
Appliances that are obviously damaged must not be operated.
·
Do not operate UV-C lamps outside of the appliance.
The appliance must be disconnected from the power supply before replacing or cleaning or other
· ·
maintenance of the UV-C lamp.
The type of UV-C lamp
Front panels bearing the ultraviolet radiation hazard symbol which have UV-C radiation are provided
with a hall switch to interrupt the power to the UV-C lamps for your safety. Do not over-ride hall
·
switch by magnet and other similar material.
Before opening front panels bearing the ultraviolet radiation hazard symbol for the conducting user
·
maintenance, it is recommended to disconnect the power.
If the UV-C lamp is damaged, it must be replaced by the manufacturer,its service agent or similarly
·
qualified persons in order to avoid a hazard.
Unintended use of the appliance or damage to the housing may result in the escape of dangerous
UV-C radiation. UV-C radiation may, even in small doses, cause harm to the eyes and skin.
This appliance contains a UV-C lamp.
is 0011012908.