Philips sonicare DiamondClean Smart HX9901/03 Bedienungsanleitung Seite 18

18
English
e. Easy-start
f. Travel case (specific types only)
The Easy-start feature gently increases the power
over the first 14 brushings to help you get used to the
brushing with the Philips Sonicare. The Easy-start
feature works in all modes other than TongueCare+
mode. This Philips Sonicare model comes with the
Easy-start feature deactivated.
Activating or deactivating the Easy-start feature
Place the handle in the plugged-in charger.
1
2 Easy-start is enabled by holding the
mode/intensity button and by pressing the power
button once while on the charger. The handle will
beep twice to confirm it is enabled.
3 Easy start is disabled by holding the
mode/intensity button and by pressing the power
button once while on the charger. The handle will
beep once to confirm it is disabled.
Note: Using the EasyStart feature beyond the initial
ramp-up period is not recommended and reduces
Philips Sonicare effectiveness in removing plaque.
Note: Each of the first 14 brushings must be at least 1
minute in length to properly move through the Easy-
start ramp-up cycle.
Note: To achieve clinical efficacy, Easy-start needs to
be deactivated.
Your Philips Sonicare comes with a travel case to
make traveling with your power toothbrush more
convenient. It is designed to accommodate the power
toothbrush handle and two brush heads. Some
models come with a USB charging travel case which
connects to your laptop via USB -this allows you to
charge your Philips Sonicare when traveling. For
information about charging your Philips Sonicare with
the travel case, see 'Battery status and charging'.