Specifications - Makita DUR365U Betriebsanleitung

ENGLISH (Original instructions)
1. Battery cartridge
2. Hanger (suspension point)
3. Lock-off lever
4. Switch trigger
5. Grip
6. Protector (cutting tool guard)
7. Cutting tool
8. Power lamp
9. Speed indicator
10. Reverse button
11. Main power button
12. Shoulder harness
13. Red indicator

SPECIFICATIONS

Model
Type of handle
No load speed
Overall length (without cutting tool)
Applicable cutting tool
(country specific)
Cutting diameter
Rated voltage
Standard battery cartridge
Net weight (with metal blade)
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
Metal blade
Plastic blade
Nylon cutting head
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB (A). Wear
ear protection.
Vibration
Metal blade
Plastic blade
Nylon cutting head
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
8
Explanation of general view
14. Button
15. Indicator lamps
16. Check button
17. Battery indicator
18. Most effective cutting area
19. Handle
20. Screw
21. Handle clamp
22. Clamp
23. Bolt
24. Cutter
25. Hex wrench
26. Nut
Metal blade
230 mm
BL1815N/BL1820/BL1820B
Sound pressure level
average
L (dB (A))
PA
75
83
77
Left hand
2
a (m/s ) Uncertainty K (m/s
h
2.5 1.5
2.5 1.5
2.5 1.5
ENG901-1
DUR365U
Bike handle
3,500/5,300/6,500 min
1,754 mm
Nylon cutting head
350 mm
D.C. 36 V
4.7 kg
Sound power level average
L (dB (A)) Uncertainty K (dB (A))
WA
86
92.8
90
Right hand
2 2
) a (m/s )
h
2.5
2.5
2.5
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
27. Cup
28. Clamp washer
29. Metal blade
30. Receive washer
31. Box driver
32. Tighten
33. Nylon cutting head
34. Metal guard
35. Plastic blade
36. Buckle
37. Hook
38. 80-100 mm
-1
Plastic blade
BL1830/BL1840/BL1840B/BL1850/
BL1850B
5.2 kg
Applicable standard
0.4
0.6
2.2
2
Uncertainty K (m/s )
1.5
1.5
1.5
255 mm
2000/14/EC
Applicable
standard
EN786