Electrolux WELL WA51-303-Serie Bedienungsanleitung Seite 16

c. Test out the handle by lifting the unit 5-6 cm above the ground with it
and giving it a gentle shake.
38. If you are adding a top handle for the first time:
a. At the top of the unit, in between the product UI & the air outlet grill you
will find two circular cavities secured with a rubber plug. Uncover the
cavity by removing these rubber plugs from the unit by gently pulling on
the sides of the plug.
b. Follow the steps 37b. and 37c (above).
FRONT PANEL CUSTOMIZATION
The look of the front panel can be customized with a fabric cover to help accentuate
it but also to ensure the unit blends well with the decor of the room. The fabric cover
has an elastic seam that helps secure it to the front panel, hence no screws or staples
are necessary for its installation.
39. Please detach the front panel from the unit and if it already has a removable
fabric cover please gently take it off the panel – ensuring not to bend the panel.
NOTE: Some models in the WELL A7 series come with a fabric permanently attached to the front panel, this fabric is
not removable from the panel, but you can still customize the panel with another fabric cover on top of the existing
fabric.
40. Remove any plastic packaging from the new fabric cover to be used.
41. Starting at the top left corner of the front panel, tuck the elastic band behind the
panel and while holding that corner in place work your way with the other hand
to the top right corner while continuously tucking the elastic band of the fabric
cover behind the edge of the panel. Now pull the fabric cover towards the bottom
edge of the panel and securely tug the rest of the fabric edge behind the bottom
part of the panel.
42. Smooth out any wrinkles on the fabric cover by pushing against the wrinkles.
43. Attach the front panel with the newly fit fabric cover back to the unit and check
the edges to ensure there is no blockage of the air inlet area.
NOTE: Customizable fabric covers are machine washable, as per the care instructions provided with the kit. It is
important that the elastic band along the edges of the fabric cover is unbroken and tight as it helps ensure an optimum
flow of air into the unit, with minimal decrease in performance. If you notice that the elastic band is broken or very
loose, it is time to replace the fabric cover.
Classified as Internal