License Plate Holder And Lighting - PROUSER 91527 Smaragd Montageanleitung

THE LICENSEPLATEHOLDER
The fastening clips to secure
the number plate are
incorporated in the back of
the number plate holder and
can easily be pressed out.
Subsequently, use two clips to
secure the number plate (at
the bottom).
LIGHTING
This bike carrier is equipped with a lighting system. This system can be
connected to the towbar power socket of your car. Seeing that there are different
kinds of sockets that require different kinds of plugs, this carrier comes with the
usual 7-pin plug and the 13-pin plug (Jaegers). As a result, the carrier can be
used with any towbar!
However, the rear fog light and reversing light only works with the 13-pin plug.
36