Filling The Special Salt Container - Bosch SGU4355/37 Gebrauchsanweisung

en
Filling the special salt
container
How the salt works
While washing is taking place, salt is
automatically rinsed out of the salt
container into the water softener where it
dissolves the lime in the water.
The dissolved lime is pumped out of the
dishwasher. The water softening system is
then ready for the next load.
This process of regeneration can only
function when the salt is dissolved in
water.
Unscrew the lid on the salt container
Before you use the dishwasher for the first
time, pour approx. 1 litre of water into the
salt container.
Place the funnel supplied with the
dishwasher in the filler hole.
Tip in enough salt to fill the container to the
top (maximum of 1.5 kg). As you tip in salt,
some of the water is displaced and drains
away. When you have done this, clean off
any remnants of salt from the area round
the neck of the container. Screw the lid
back onto the container, ensuring that it is
not cross-threaded.
26
.
24
The LOW SALT indicator
panel will light up initially but will extinguish
again after a short period when the salt
solution has become sufficiently
concentrated.
If the switch is set to "0", it is
not necessary to add any salt,
as none is consumed while the
dishwasher is operating. If the
switch is set between "1" and
"3", then salt must be added.
Warning!
Do not pour detergent into the
container for special salt. This
would destroy the water
softener.
LOW SALT indicator
Add more salt as soon as the LOW SALT
indicator
4
on the front
4
on the front panel lights up.