ELSA TANGO TG2000 Installationsanleitung Seite 13

10 Installing the ISDN Terminal Adapter
Make the first move
1
Make sure that your PC and the ISDN terminal adapter are switched off.
Connect ELSA TanGo 2000 to the power supply
2
Connect your ISDN terminal adapter to the mains power supply · using the AC power
adapter supplied.
Connection to your PC
3
Connect the V24 cable supplied to the appropriate port of the serial interface (COM port)
» of your PC.
Connecting analog devices
4
Plug the supplied telephone adapters into the sockets designed for them (¿ and ´), and
then connect you analog devices (telephone, fax, answering machine) via the adapter.
Connection to the ISDN line
5
Connect the telephone line connection cable (supplied) with the line connector on the
ISDN terminal adapter ² and with the ISDN S
Switch on your PC and ISDN terminal adapter
6
Switch the computer on first, and then your ISDN terminal adapter ³ .
ELSA TanGo 2000
³
On/Off switch
·
Power input
»
Serial port (V.24/RS232C interface)
¿
a/b port 1
´
a/b port 2
²
ISDN line connection
connection socket.
0