Dab+ Operation - DeWalt DWST1-75659 Bersetzung Der Originalanweisungen

EnGLIsh
Finding a desired frequency can be performed in one of two
methods: Auto Scan or Manual Tune.
Auto Scan
1. Press the audio source button
is reached.
2. Press the selection dial
General setup).
3. Rotate the selection dial clockwise until Auto Scan is
reached and press to select. The Auto Scan begins searching
for the closest strong, clear signal.
Rotate the dial clockwise to scan up the frequencies.
-
- Rotate the dial counterclockwise to scan down
the frequencies.
4. Once a desired frequency is found, save it to one of the
channel preset buttons (see setting the Preset Buttons).
Manual Tune
1. Select the required audio source and enter the Main Menu
(see General setup).
2. Rotate the selection dial
Manual Tune.
3. Rotate the selection dial clockwise to go up the frequencies
or counterclockwise to go down the frequencies, until the
desired frequency is reached.
4. Once a desired frequency is found, save it to one of the
channel preset buttons (see setting the Preset Buttons).
Setting FM Presets
1. Set the radio to the desired station/frequency (see Auto
Scan or Manual Tune).
2. Press and hold the desired preset button
a message >> P# is displayed. The station is saved to the
displayed preset button number (#).
3. Repeat steps 1 and 2 to set additional preset stations.
4. Press the back button
Source screen.
5. The selected station is indicated on the LCD screen (button
2 in the example).

DAB+ OPERATION

1. When first turned on or after restoring to default settings,
the appliance will automatically run a full station scan to find
broadcasting stations.
20
2. Use the selection dial
DAB+ MENU
Full scan
1. Press the Selection Dial
the menu.
2. When Full Scan is chosen, the appliance will run a full band
scan, displaying the number of stations found.
3. When complete, the appliance will play the first station on
the band.
34
until the required source
to enter the Main Menu (see
20
20
clockwise and press it to select
to return to the Audio
to scroll through the stations.
20
, and turn it to browse through
stations List
When selected, the appliance will display the full list of available
stations. Browse the list using the selection dial
select a station.
nOTE: When moving locations or if reception was poor in the
original scan, this may result in an empty or incomplete list of
available stations. Manually running an Full Scan will find all
available broadcast stations.
setting Favorites (Presets)
1. Set the radio to the desired station (see Full Scan).
2. Press and hold the desired preset button
a message >> P# is displayed. The station is saved to the
displayed preset button number (#).
3. The selected station is indicated on the LCD screen.
Information Display
The following information can be selected to be displayed
on screen:
scrolling Text – loop through all types of information,
3 seconds each.
Frequency - the playing station's frequency.
Type - the type of media broadcast made by the current station.
Data rate - the resolution that is broadcast by the station.
nOTE: The information is provided by the stations, and not
controlled by the appliance.
DAB Settings
1. Prune stations - Some stations previously received by your
radio that might no longer be available will display blanks in
place of the station name. To remove these stations from the
station list press the Selection Dial
until
confirm your choice (similar to "Restore to Default").
2. DRC (dynamic range compression) - This function
reduces the difference between the loudest and quietest
audio being broadcast. Effectively, this makes quiet sounds
comparatively louder, and loud sounds comparatively
quieter. The following options are available:
- DRC off
- DRC low
- DRC high
nOTE: DRC only works if it is enabled by the broadcaster
Important Radio Notes
1. Reception will vary depending on location and strength of
radio signal.
2. Running the radio while connected to certain generators
may cause background noise.
Adjusting the Sound Preferences
Sound preferences can be adjusted by changing the
equalization of the Bass, Treble or Mid.
1. Press the selection dial
2. Rotate the selection dial clockwise until Main Menu
is reached.
3. Press the selection dial to access the Main Menu.
20
and press to
20
. You will be asked to
20
.
until