Residual Risks; Package Contents - DeWalt DW717XPS Bersetzt Von Den Originalanweisungen

• Whenever the situation allows, mount the machine to a
bench using
bolts with a diameter of 8 mm bolts and 80 mm in length.
WARNING: We recommend the use of a residual
current device with a residual current rating of 30mA
or less.

Residual Risks

The following risks are inherent to the use of saws:
– injuries caused by touching the rotating parts
In spite of the application of the relevant safety regulations and
the implementation of safety devices, certain residual risks cannot
be avoided. These are:
– Impairment of hearing.
– Risk of accidents caused by the uncovered parts of the
rotating saw blade.
– Risk of injury when changing the blade.
– Risk of squeezing fingers when opening the guards.
– Health hazards caused by breathing dust developed when
sawing wood, especially oak, beech and MDF.
The following factors increase the risk of breathing problems:
– No dust extractor connected when sawing wood
– Insufficient dust extraction caused by uncleaned exhaust
filters
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Carrying point
Keep hands away from blade.
Do not stare directly into the light source.
DATE CODE POSITION (FIG. A1)
The Date Code (13), which also includes the year of manufacture,
is printed into the housing.
Example:
2016 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Assembled mitre saw
1 Blade spanner
1 Saw blade
1 Dustbag
1 Material clamp
1 Instruction manual
• Check for damage to the tool, parts or accessories which
may have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Description (fig. A1–A6)
WARNING: Never modify the power tool or any part
of it. Damage or personal injury could result.
A1
1 On/off switch
2 Moveable lower blade guard
3 Fence left-hand side
4 Mitre lever
5 Mitre latch
6 XPS on/off switch
TM
7 Mitre scale
8 Fence right-hand side
9 Kerf plate
10 Carrying handle
11 Operating handle
12 Head lock up release lever
13 Date code
14 Spindle lock
15 Bevel scale
16 Rail lock knob
17 Grooving stop
A2
18 Slide stop
19 Fixed upper blade guard
20 Bevel latch/lever
21 Bevel clamp handle
22 Head lock down pin
23 Wrench
24 Hand indentation
25 Bench mounting holes
26 Dust spout
A3
27 Dustbag
A4
28 LED Worklight System
Optional accessories
A5
29 Work support extension
A6
30 Work piece clamp
INTENDED USE
Your D WALT DW717XPS Mitre Saw has been designed for
e
professional cutting wood, wood products and plastics. It
performs the sawing operations of cross-cutting, bevelling and
mitring easily, accurately and safely.
This unit is designed for use with a nominal blade diameter 250
mm carbide tip blade.
english
37