Resetting The Microprocessor; Setup Menu - Pioneer MVH-S620BT Bedienungsanleitung

Indication Description
Appears when a Bluetooth telephone is connected to this unit.
Indicates the battery level.
Appears when a device is being connected to the unit for charging.
Appears when a radio signal is received.
Indicates the antenna level.

Resetting the microprocessor

The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1
Press the RESET button with a pen tip or other pointed instrument.

Setup menu

When you turn the ignition switch to ON after installation, the setup menu appears in
the display.
WARNING
Do not use the unit in standard mode when a speaker system for network mode is connected to the
unit. Do not use the unit in network mode when a speaker system for standard mode is connected to
the unit. This may cause damage to the speakers.
1
Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
RESET button
- 5 - - 5 -