Monacor PA-806DAP Bedienungsanleitung Seite 14

4.2.2 Bluetooth receiver
Wireless connection of the integrated Bluetooth
receiver to the audio source is supported to re-
play music from a Bluetooth audio source (e . g .
smartphone or tablet computer) via the amplifier .
1 2
3
1 Replay status: replay
2 Current sound preset
3 Connection status:
BT NOT LINK = no connection
BT LINK OK = connection exists
When the connection has not been established
yet, "BT NOT LINK" will be shown . To establish
the connection in the operating mode "Blue-
tooth receiver":
1) Activate the Bluetooth function at the Blue-
tooth source . On the list of available devices,
the amplifier will appear as "Monacor" .
2) When prompted for the PIN number, enter
1234 .
3) Pair the Bluetooth source with the amplifier
(see manual of the Bluetooth source, if re-
quired) . The devices will be connected auto-
matically .
Operation can be made at the Bluetooth source,
via the buttons on the module or by means of
the remote control .
Remote control 
Module 
PLAY ×
II ×
PRE / NEXT ×
I   /  I ×
The volume of the Bluetooth replay depends on
the settings made at the Bluetooth source and
the music module .
14
/ pause
Function
to pause / to continue replay
previous / next title
4.2.3 Digital radio DAB/ DAB+
1
2
3
1 Strength of signal received
2 Station name
3 Information about programme and station
When the operating mode Digital radio receiver
(DAB/ DAB+) is used for the first time, start the
automatic station scan first . During the scan,
"Scanning . ." and the number of stations already
found will be shown . After the scan, the stations
found can be selected .
Repeat the scan when there is a change
in the local stations offered, when you have
changed your location or when the antenna or
its alignment have been modified .
Remote control 
Module 
RPT/SCAN × to start automatic station scan
× „Scanning.."
SCN (U/SD)
PRE / NEXT × previous / next station
I   /  I × „Select station"
to switch between the information
shown (3):
programme information
channel and frequency
FOLDER ×
transmission standard
stereo / mono
time and date
strength and quality of signal received
Function