Product Features; Technical Data; Noise/Vibration Information - BTI A-BS1 BL12V Originalbetriebsanleitung

Product Features

English
The numbering of the product features refers to
the diagram of the power tool on the graphics
page.
(1) Keyless chuck
(2) Torque presetting ring
(3) Gear selector switch
(4) Battery release button
(5) Battery A)
(6) Rotational direction switch
(7) On/off switch
(8) Battery charge indicator
(9) "PowerLight" lamp
(10) Handle (insulated gripping surface)
(11) Screwdriver bit A)
A)
(12) Universal bit holder
(13) Belt clip A)
A)
(14) Bit holder
(15) Colour clip A)
A) Accessories shown or described are not included
with the product as standard. You can find the com-
plete selection of accessories in our accessories
range.

Technical Data

English
Cordless drill/driver
Article number
Rated voltage
A)
No-load speed
– First gear
– Second gear
Max. torque, hard/soft
screwdriving application
according to ISO 5393 A)
Max. drilling diameter (first/second gear)
– Steel
– Wood
Max. screw diameter
Chuck capacity
Weight according to
EPTA-Procedure
A)
01:2014
Recommended ambient
temperature during
charging
Permitted ambient tem-
perature during opera-
tion B) and during stor-
age
1 609 92A 500 • 26.7.19
A)
A-BS1 BL12V
9 094 779
V= 12
min -1 0 – 460
min -1 0 – 1750
Nm 35/20
mm 10
mm 32
mm 8
mm 0.8 – 10
kg 0.93 – 1.2
°C 0 to +35
°C -20 to +50
Cordless drill/driver
Recommended batter-
ies
Recommended char-
gers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C

Noise/vibration information

Noise emission values determined according to
EN 60745-2-1, EN 60745-2-2.
Typically, the A-weighted sound pressure level of
the power tool is 73 dB(A). Uncertainty K = 3 dB.
The noise level when working can exceed the
volume stated. Wear hearing protection!
Vibration total values a (triax vector sum) and un-
h
certainty K determined according to
EN 60745-2-1, EN 60745-2-2:
Drilling into metal: a <2.5 m/s
h
2
Screwdriving: a <2.5 m/s
h
The vibration level and noise emission value given
in these instructions have been measured in ac-
cordance with a standardised measuring proced-
ure and may be used to compare power tools.
They may also be used for a preliminary estima-
tion of vibration and noise emissions.
The stated vibration level and noise emission
value represent the main applications of the
power tool. However, if the power tool is used for
other applications, with different application tools
or is poorly maintained, the vibration level and
noise emission value may differ. This may signific-
antly increase the vibration and noise emissions
over the total working period.
To estimate vibration and noise emissions accur-
ately, the times when the tool is switched off or
when it is running but not actually being used
should also be taken into account. This may signi-
ficantly reduce vibration and noise emissions over
the total working period.
Implement additional safety measures to protect
the operator from the effects of vibration, such as
servicing the power tool and application tools,
keeping their hands warm, and organising work-
flows correctly.
Assembly
English
Remove the battery from the power tool be-
u
fore carrying out work on the power tool (e.g.
maintenance, changing tool, etc.). The bat-
tery should also be removed for transport and
storage. There is risk of injury from unintention-
ally pressing the on/off switch.
A-BS1 BL12V
12V 6.0Ah L-x
12V 2.0Ah L-x
LG 12V 4A 2019
English
2 2
, K = 1.5 m/s ,
2
, K = 1.5 m/s .
English | 25