Operation; Operation Instruction´s; Emergency Call - ATH-Heinl ATF602 Bedienungsanleitung

OPERATION

Operation instruction´s
Emergency
call:
® Urheberrecht ATH-Heinl GmbH & CO.KG, Alle Rechte vorbehalten / Druckfehler und technische Änderungen vorbehalten / Stand: 2021-07
Automatic transmission fluid changer
Risks for hum an and environm ent
• Read all service procedures and precautions, installation instructions and operating
instructions thoroughly.
• Failure to observe these precautions or improper use of the product could result in property,
injury or death. Never let untrained personnel perform these procedures or operate the unit.
P recautions and rules of conduct
• Read and understand this manual before using the ATF602.
While the unit is in operation, do not smoke in its vicinity.
•
• Never use the machine near sources of heat or fire.
Do not expose to direct sunlight or rain and use only in well-ventilated work areas.
•
Always switch off the device after use.
•
• Keep the hoses away from rotating and hot items such as fans, radiators, etc. during use.
Auto exhaust gases contain various toxic and harmful gases (e.g. carbon monoxide,
•
hydrocarbons, nitrogen oxides, etc.). While the device is in operation, protective goggles,
protective masks and protective clothing must be worn.
To avoid injury, keep away from hot elements such as the exhaust pipe and radiator.
•
• When disconnecting the piping of the piping system, wrap a suitable tab around the
connector to avoid spillage of gear fluid.
While the unit is operated, children and mentally handicapped people should stay away.
•
• To prevent damage caused by improper operation, the operator should be very familiar with
the gear shifting of the automatic transmission.
• The driving wheels have to moving freely by cleaning or changing the oil.
The unit must always be in the normal and intended stand position.
•
• An oil change should always be carried out by appropriately trained personnel. The quality
of the automatic transmission used must correspond to the manufacturing specifications.
ATH-Heinl GmbH & Co.KG assumes no responsibility for direct or indirect damage caused by
incorrect operation.
Behaviour in case of error
Detected errors have to be reported to the responsible person.
•
Keep in mind in case of an accident not only to save the injured person and to render first
•
aid but also to secure the scene of accident.
• Report every accident immediately to the responsible person.
• Place of first aid kit and first aid book:___________________
• Record all information in the first aid book.
M aintenance, Disposal
• Reparations are only allowed to be made by the after sales service of the manufacturer.
Produkthersteller ATH-Heinl GmbH & CO.KG
First Aid
- 10 -