ZUMEX Essential Basic Bedienungsanleitung Seite 53

All manuals and user guides at all-guides.com
· Calibrate: Select CALIBRATE and press ON. Next, set your PIN number and press
ON. The machine will ask for confirmation: 'Calibrate?', press 'ON' to confirm the
automatic calibration. The machine will then carry out said calibration and dis-
play the adjusted calibration value. Return to the menu, pressing OFF.
This option must only be carried out under the supervision of the Technical Servi-
ce and when it has been specifically indicated.
Pin: Your juicer has a password so you can access the counters and modify configu-
ration parameters. The standard programmed PIN is 0000 but you can personalise
this PIN. On the TECHNICAL SERVICE menu select PIN and press ON to confirm your
selection. If this is the first time you have changed your PIN, the standard PIN 0000
will appear and press ON; if you have already programmed a password previously,
enter the old password, use the cursors
from digit to digit and ON to confirm the password. Upon entering the correct PIN the
"New PIN" screen will appear. Programme the new password, select each digit with
the cursors
, press OFF to move from digit to digit and ON to confirm the new PIN.
If you forget the Pin number programed, you will be required to reset machine's
MENU. In order, to do that, enter CONFIGURATION press
press button simultaneously.
Counters: You can control the counter and discounter of your juicer. The counter
allows you to establish the no. of oranges squeezed, the discounter function allows you
to programme a given no. of oranges and gradually consume oranges from this total.
· Partial counter: This shows you the no. of oranges consumed and it can be set to zero.
On the TECHNICAL SERVICE menu select COUNTERS > PARTIAL COUNTER
and press ON to confirm your selection. Enter your PIN (Remember: Select each digit
with the cursor
sword). You can view the number of oranges squeezed on the screen. To set the counter
to zero press and confirm using ON and on the machine display you will see that the
counter has been set to zero. Return to the menu, pressing OFF repeatedly.
, press OFF to move from digit to digit and ON to confirm the pas-
to select each digit, press OFF to move
button, and while pressed,
43