Before Calling For Service; Specifications - Sharp XE-A101 Bedienungsanleitung

Maintenance

Before Calling for Service

If you encounter a problem, use this chart before calling for service.
Problem
• The display shows symbols that do not
make sense.
• The display will not illuminate even
when the mode switch is not set to "
The machine fails to operate when any
key is pressed.
• The display is illuminated, but the
machine does not accept key entries.
• Journal paper does not feed properly in
the printer.
• Printing is faded or illegible.

Specifications

Model:
Size:
Weight:
Power Source:
Power Consumption:
Work Temperature:
Display:
Printer:
Printing Capacity:
Paper Roll:
Cash Drawer:
Accessories (supplied):Paper roll
* Specifications and appearance are subject to change without notice.
24
All manuals and user guides at all-guides.com
• Was the machine reset in the proper way shown on
page 4?
• Is the power supplied to the electrical outlet? (Plug
". in another electrical device.)
• Is the power cord firmly connected to the electrical
outlet?
• Is the mode switch properly set to the REG
position?
• Was the machine reset in the proper way shown on
page 4?
• Is the take-up spool installed properly?
• Is there a paper jam?
• Isn't the ink roller used up?
• Is the ink roller installed properly?
XE-A101
330(W) x 363(D) x 253(H) millimeters
5.0 kg
Official (nominal) voltage and frequency
Stand-by: 6.4 W Operating: 13 W
0 to 40 °C
LED (Light-Emitting Diode) numeric display
1 station print wheel selective type
Max. 13 digits
Width: 57.5 mm ± 0.5 mm
Max. diameter: 80 mm
Paper quality: Bond paper
(thickness: 0.06 to 0.085 mm, weight: 47 to 64 g/m
3 slots for bills, 5 for coins
1 roll
Drawer lock key 2
Instruction manual 1 copy (this manual)
Quick start guide 1 copy
Ink roller 1 (already installed)
Take-up spool 1
Item to check
2 )