WEBTEC HPM7000 Bedienungsanleitung Seite 79

The file size expected and maximum storage time for the measurement
are calculated and displayed according to the applicable parameters
selected.
The table below contains information on the triggers available:
Designation Description
Keystroke Measurement is started by tapping on the corre-
sponding button
Level Measurement is started on exceeding or dropping
below a limit value
Window Measurement is started on exceeding or dropping
below one of two limit values for a defined
measuring range
Time Measurement is started at a defined moment of
time
External Measurement is started on transition of a digital
signal from High to Low
Measurement is started on transition of a digital
signal from Low to High
Channel Measurement is started when defined
warning value warning values occurs
Channel alarm Measurement is started when defined
value alarm values occur
INFORMATION
Please note that the D-IN connection must be activated for the exter-
nal trigger. Refer to Chapter & "D-IN/D-OUT F1/F2".
Operation
79