Beko TSE 1420 Bedienungsanleitung Seite 22

Temperature in the fridge or freezer is very high.
• The fridge temperature is adjusted to a very high value. >>>Fridge compartment
temperature setting has an effect on the temperature of the freezer. Change the
temperatures of the fridge or freezer and wait until the relevant compartments
attain a sufficient temperature.
• Doors are opened frequently or left ajar for a long time. >>>Do not open the
doors frequently.
• Door is ajar. >>>Close the door completely.
• The cooler/freezer is plugged in or loaded with food recently. >>>This is normal.
When the cooler/freezer is plugged in or loaded with food recently, it will take
longer for it to attain the set temperature.
• Large amounts of hot food might be put in the cooler/freezer recently. >>>Do
not put hot food into the cooler/freezer.
• Vibrations or noise.
• The floor is not level or stable. >>> If the cooler/freezer rocks when moved
slowly, balance it by adjusting its feet. Also make sure that the floor is strong
enough to carry the cooler/freezer, and level.
• The items put onto the cooler/freezer may cause noise. >>>Remove the items
on top of the cooler/freezer.
There are noises coming from the cooler/freezer like liquid flowing, spraying,
etc.
• Liquid and gas flows occur in accordance with the operating principles of your
cooler/freezer. It is normal and not a fault.
Whistle comes from the cooler/freezer.
• Fans are used in order to cool the cooler/freezer. It is normal and not a fault.
Condensation on the inner walls of cooler/freezer.
• Hot and humid weather increases icing and condensation. It is normal and not a
fault.
• Doors are opened frequently or left ajar for a long time. >>>Do not open the
doors frequently. Close them if they are open.
• Door is ajar. >>>Close the door completely.
Humidity occurs on the outside of the cooler/freezer or between the doors.
• There might be humidity in the air; this is quite normal in humid weather. When
the humidity is less, condensation will disappear.
21
EN