Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User Manual
Product Diagram
Front Panel
5VDC In - Connect the included USB Type A to DC cable. Please ensure the USB cable is connected to
a 5V 1A power supply.
R / L In - Connect an analogue audio source device.
Rear Panel
TosLink (Optical) Out – Connect a digital TosLink (Optical) audio output device.
Coaxial Out - Connect a digital coaxial audio output device.
Power LED - This LED will illuminate once power is provided to the ADC.
Installation
Prior to installation, please ensure all devices are switched off.
1. Connect the required audio output device to the TosLink (Optical) or Coaxial output connections.
2. Connect a phono audio source device to the R/L In port.
3. Connect the DC cable to a 5V 1A USB power source and then connect to the 5VDC In port of the
converter. The power LED will illuminate.
Please ensure cables are inserted and removed carefully to ensure there is no damage to the ports, in
particular, the plastic cover of the TosLink (Optical) connections. Please also ensure any protective caps
are removed from the optical cables before installation
Lindy regularly checks and tests our product range to ensure maximum compatibility and performance.
For the most up to date version of this manual, please refer to your local Lindy website, search for the
relevant part number and find the manual under Downloads.
English
Werbung
