Special Hazards - WIKA A-IAI-1 Betriebsanleitung

3. Safety
WARNING!
Special conditions for all variants:
3. The setting of the internal buttons may only be carried out by
trained personnel.
4. The instruments only fulfil the requirements of intrinsic safety
once an angular connector, which meets the appropriate IP
ingress protection, has been connected. The instruments
must be installed in locations where they are protected from
external damage.
5. The back of the case may not be cleaned with a cloth or
other means which can generate an electrostatic charge.

3.5 Special hazards

WARNING!
Observe the information given in the applicable type exami-
nation certificate and the relevant country-specific regulations
for installation and use in hazardous areas (e.g. IEC 60079-14,
NEC, CEC). Non-observance can result in serious injury and/or
damage to property.
DANGER!
Danger to life caused by electric current
Upon contact with live parts, there is a direct danger to life.
The instrument may only be installed and mounted by skilled
personnel.
WARNING!
Do not use this instrument in safety or emergency shutdown
devices. Incorrect use of the instrument can result in injury or
material damage.
This instrument has been designed and tested in accordance
with the relevant safety regulations for electronic measuring
instruments.
The trouble-free function and operational safety of the instru-
ment can only be guaranteed if the general safety measures
and the instrument-specific safety instructions given in this
manual are followed.
WIKA operating instructions attachable indicator model A-IAI-1
EN
9