Technical Data - Zanussi ZCE54001WA Benutzerinformation

Minimum distances
Dimension
A
B
C

Technical data

Dimension
Height
Width
Depth
Total electricity power
Appliance class
Levelling of the appliance
Use small feet on the bottom of appliance to set
the appliance top surface level with other
surfaces.
Anti-tilt protection
Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
CAUTION!
Make sure you install the anti-tilt
protection at the correct height.
Make sure that the surface behind
the appliance is smooth.
You must install the anti-tilt protection. If you do
not install it, the appliance can tilt.
www.zanussi.com
All manuals and user guides at all-guides.com
Your appliance has the symbol shown on the
picture (if applicable) to remind you about the
mm installation of the anti-tilt protection.
400
650
150
mm
855
500
600
7335 W
3
1. Install the anti-tilt protection 317 - 322 mm
2. You can find the hole on the left side at the
down from the top surface of the appliance
and 80 - 85 mm from the side of the
appliance into the circular hole on a
bracket. Screw it into the solid material or
use applicable reinforcement (wall).
back of the appliance. Lift the front of the
appliance and put it in the middle of the
space between the cupboards. If the space
between the bench cupboards is larger
than the width of the appliance, you must
80-85
mm
317-322
mm
15