Yamaha RX-V457 Bedienungsanleitung Seite 34

PLAYBACK
Notes
• When playing a DTS-CD/LD, be sure to set INPUT MODE to
DTS.
• If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding even if you
make a digital connection between this unit and the player
depending on the player.
Displaying information about the input
source
You can display the type, format and sampling frequency
of the current input signal.
1
Select the input source.
CD MD/CD-R
DVD DTV/CBL
REC
DISC SKIP
2
Press AMP to select the AMP mode, then
press STRAIGHT so that "STRAIGHT"
appears in the display.
AMP
STRAIGHT
32
TUNER SLEEP
VCR V-AUX
MULTI CH IN
AUDIO
CODE SET
STRAIGHT
then
ENT.
3
Press u / d to display the following
information about the input signal.
(Format) Signal format display. When the unit
cannot detect a digital signal it
automatically switches to analog input.
in
Number of source channels in the input
signal. For example, a multi-channel
soundtrack with 3 front channels, 2
surround channels and LFE, is
displayed as "3/2/LFE".
fs
Sampling frequency. When the unit is
unable to detect the sampling
frequency "Unknown" appears.
rate
Bit rate. When the unit is unable to
detect the bit rate "Unknown" appears.
flg
Flag data encoded with DTS or Dolby
Digital signals that cue this unit to
automatically switch decoders.
ENTER
A/B/C/D/E
PRESET/CH