Trouble Shooting - HOLZMANN-MASCHINEN FSP 130 Betriebsanleitung

13

TROUBLE SHOOTING

BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS,
DISCONNECT THE MACHINE FROM THE POWER SUPPLY.
Trouble
Sray gun buzzes and does
not work
Sray gun does not suck in
Sray gun sucks in, but
does not spray
Sray gun works, but
sprays unevenly
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Possible cause
 Piston stuck
 Defective drive
 No valve in the pump
 Nozzle clogged
 Ducts and holes in atomiser clogged
 Spray material in container running
out
 Spray gun held inclined leading to
sucking in of air
 Viscosity of spray material too high
(too thick)
 Fine adjustment button not set
correctly
 Nozzle worn out
 Valve worn out
 Wrong valve inserted
TROUBLE SHOOTING
Solution
 Disassemble pump and clean
with thinner
 Conntact point of sale
 Insert valve
 clean
 clean
 Refill
 Hold the spray gun whenever
possible horizontal
 Dilute accordingly
 Reset according to spray
material
 Replace
 Replace
 Use correct valve
Farbspritzpistole / Solenoid Sprayer FSP 150
Seite 26