S-Meter; Scan Mode; Talkback Function; Resetting To Factory Settings - Albrecht AE 6290 Bedienungsanleitung

5.10. S-Meter

The S-meter shows the current signal strength. The strength is
indicated by the
The more bars are displayed, the stronger the signal.

5.11. Scan mode

Your AE 6290 radio has an automatic channel search that can
be used to view all channels one after the other.
• Long press
• Scanning stops every time a signal is received and you
can listen in on the conversation.
If no action is taken, scanning will continue a) after communication
on the channels has ended or b) after approximately 5 seconds
of observation time, if communication takes longer.
• You can exit the scan mode at any time by pressing the
EMG or PTT key.

5.12. Talkback function

With the talkback functions you can hear your own modulation
for verification via the speaker of the AE 6290.
Press and hold the PTT transmit key and select the talkback
level with the ▲ / ▼ keys.

5.13. Resetting to factory settings

To reset the device to its factory settings, proceed as follows:
• Go to the main menu and select RESET
If RESET is blinking in the display, press and hold the
•
MENU button until the blinking stops
• The radio is now reset to factory settings
symbol in the lower left of the display.
Up or Down button for 5 seconds
▲ ▼
33