Functions; Battery Status; Timer Function - Duux Whisper Flex Ultimate Bedienungsanleitung

4. Functions

Wind mode
Natural wind mode
Temperature
function

Timer function

WiFi Status
12
Night mode
Horizontal oscillation
Vertical oscillation

Battery status

Power status
Instructions for use
WiFi status
Only visible when WiFi is connected
Power status
Only visible when fan is off
Battery status
Shows the battery status in 3 levels.
Regular mode
Choose from 30 speed settings for a
consistent air flow.
Natural wind mode
Variable wind speeds and oscillation in both
directions to simulate natural wind conditions.
Night mode
By selecting this mode, the LED display will
automatically turn off after 10 seconds for an
undisturbed night's sleep
Temperature function
Set a temperature goal. When this setting
is active, the fan will measure ambient
temperature and will decrease its when speed
when the goal is reached.
Timer function
Set a timer to switch the fan off automatically.
Choose a time between 0 and 12 hours.
Horizontal oscillation function
Set an oscillation angle to rotate the fan
horizontally from left to right. There are three
preset angles; 30, 60 and 90 degrees.
Vertical oscillation function
Set an oscillation angle to rotate the fan
vertically from top to bottom. There are two
preset angles; 90 and 105 degrees.
13