Safety Instructions - i-tec USB 3.0 Display AdapterDual HDMI DVI/VGA Gebrauchsanweisung

Note: DO NOT connect the adapter to your computer before installing the driver. Before the installation is
complete, it's normal that the screen flicks black a couple of times. Then we recommend the restart of your PC /
notebook again.
VERIFY INSTALLATION
You can verify in Device Manager - USB Display Adapters.

SAFETY INSTRUCTIONS

Do not expose to the extreme temperatures and air moisture.
Ÿ
Use the device on the flat pads – you avoid the slip and fall on the ground.
Ÿ
Keep the activators and manual for the later possible use.
Ÿ
In the co-operation with the service department:
Check the functionality after the drop into water, on the ground.
Ÿ
Check the functionality after the cover breakthrough.
Ÿ
FAQ
Question: How correctly install USB 3.0 Display Adapter in Windows OS?
Answer: Don't plug USB 3.0 Display Adapter to USB port in PC / notebook before installing drivers. We
recommend actual drivers from DisplayLink page (for internal chipset DL-3xxx serie) here:
http://www.displaylink.com/support/index.php. After installing of drivers and connecting of adapter to USB
port of PC / notebook is installation finished automatically.
Question: Is there a drivers for Windows 8 / 8.1 32/64bit for USB Display Adapter?
Answer: Yes, you can download actual driver from DisplayLink page (for internal chipset DL-3xxx serie) here:
http://www.displaylink.com/support/index.php. Don't plug USB 3.0 Display Adapter to USB port in PC /
notebook before installing drivers. After installing of drivers and connecting of adapter to USB port of PC /
notebook is installation finished automatically.
Question: Do you have a problem with detection USB 3.0 Display adapter in USB 3.0 port my PC / notebook?
Answer: Maybe, you have old drivers for USB 3.0 port on your PC / notebook. Please, read more information
here: http://www.displaylink.com/support/ticket.php?id=315 and download the latest drivers for your USB 3.0
chipset in your PC / notebook and install it by recommended inctructions.
Question: Can I obtain more detailed information about problems with USB 3.0 Display Adapter?
Answer: Of course, you can contact our support or you can find useful information on FAQ pages of
DisplayLink here: http://www.displaylink.com/support/knowledgebase.php.
Question: Adapter has power jack, when I have to use power supply?
Answer: In case of insufficient power supply, HDMI cable longer than 10 m, use an external power adapter 5 V
/ 2.5 A. This power adapter can be obtained from http://www.i-tec-europe.eu/.
For more information, please refer to the User's Manual on the provided CD.
Quick Start
EN
06