Installation And Commissioning; Unpacking And Setting Up - Xylem SI Analytics TitroLine 7800 Gebrauchsanleitung

2

Installation and Commissioning

2.1

Unpacking and setting up

The device has been put together especially for you (basic unit + corresponding modules and accessories), there
may be differences with respect to the delivery and the accessories described in this chapter. The scope of
delivery, please refer to the attached packing list. For any questions please contact us directly (see backside of
this operating manual).
The device itself as well as all related accessory and peripheral parts have been carefully checked at the factory
to ensure their correct function and size. Please ensure that the small accessories are also removed in full from
the packaging.
The device may be placed on any flat surface.
Scope of delivery:
a) Titrator TitroLine
 TitroLine
®
7800
 Keyboard TZ 3835
 Power supply TZ 1853 (100V ... 240V) incl. some primary adapter
 Manual keypad TZ 3880
 Connection cable for stirrer/pump TZ 1577
 Stand rod TZ 1510 (10 mm x 370 mm)
 Piston extraction tool TZ 3813
 Electrode holder Z 305
 Stop pin for titration clamp Z 304
®
b) TitroLine 7800 with KF accessories
 TitroLine
®
7800 basic unit (see above)
 Exchangeable head WA 05, WA 10 or WA 20
 The KF titration stand (pump and stirrer) TM 235 KF with waste (1 L clear glass), solvent (1 L amber
glass) and bottle for the desiccant (100 ml) and with all PTFE and PVC hoses
 Titration vessel TZ 1770 incl. Titration tip TZ 3285 (KF micro valve)
 KF starter kit TZ 1789 with desiccant (molecular sieve), glass wool und a set of syringes and needles
 Electrode KF 1100
®
7800 (basic unit)
155